Skip to content
PrestiVac

Vacuum solutions engineered for abatement & remediation

The trades where HEPA filtration isn't a preference — it's written into the rules. Work happens inside containment, waste leaves sealed and labeled, clearance decides when it's done, and every piece of equipment is specified with the governing jurisdiction's requirements in hand.

Talk to an ExpertExplore Solutions

  • HEPA-Tested Filtration

    The filtration class the rules name

  • Regulation-Aware

    Asbestos, lead & RRP frameworks

  • Containment-Side Ready

    Works inside the barriers

  • Sealed Waste Path

    Bag-out discipline built in

  • Explosion-Proof

    Manufacturing specialists

  • 1000+

    Vacuums sold worldwide

  • USA

    Designed & manufactured

  • Direct

    Buy from the manufacturer

  • NFPA 660

    ATEX / IECEx principles

Abatement & Remediation production process explorer

Every stage. Every challenge. The right vacuum solution.

Abatement is a choreography of boundaries — build the containment, hold the pressure, remove the hazard, seal the waste, prove the clearance. Walk the stages to see where recovery equipment carries the work.

Stage 01 — Assessment & planning

Surveys identify the hazard, and the governing rules — federal, state, local — set the methods and the equipment requirements before anything is disturbed.

Key challenges

Where the rules name the equipment

  • HEPA Is Written In

    The lead RRP rule explicitly requires HEPA vacuums; asbestos practice is built on them — the equipment class is named, not chosen.

  • Regulated Carcinogens

    Asbestos is a Group 1 carcinogen with its own OSHA standards; lead carries its own — the work exists because the materials are this serious.

  • The Boundary Is Everything

    Containment and negative pressure define the job — equipment that works inside the barriers without breaking them is the requirement.

  • Legacy Surprises

    Older vermiculite insulation can carry asbestos contamination — the Libby legacy — so suspect materials are treated as such until tested.

  • Spores Are Particles Too

    Mold remediation runs the same capture-and-contain logic — with the honest first step that the moisture source gets fixed or the mold returns.

  • Jurisdiction Rules Equipment

    Abatement equipment must satisfy the governing rules where the job is — specify with those requirements in hand, always.

Dust & materials knowledge center

Know the hazard. Follow its rules.

Common Abatement & Remediation materials and recovery approaches
MaterialCombustibleRecovery approachDeep dive
Asbestos-containing debrisNo — regulated carcinogenWetted removal; HEPA recovery inside containment; sealed disposal per the governing rules
Lead paint chips & dustNoRRP and lead-standard methods — HEPA vacuums named in the rule; sealed bag-out
Demolition silicaNo — inertHEPA capture at the work; the silica standards govern
Mold & spore debrisNoContainment plus HEPA capture — moisture source corrected first
Vermiculite insulationNoTreated as suspect for asbestos until tested; handled accordingly
Contaminated general debrisVariesAssessment-driven handling under the applicable rule

Combustibility and severity are material- and particle-size-specific — testing and your Dust Hazard Analysis govern. Full directory: the full materials directory.

Applications in abatement work

Built for performance. Built for compliance.

View all products →

Representative case study

Controlling Silica Sand & Reactive-Metal Dust in a Foundry

How a representative jobbing foundry runs housekeeping on the oldest dust hazard and the hottest floor at once — silica sand keyed to the exposure standards while shakeout concentrates the respirable fraction, and reactive-metal casting cells carry their own combustible-dust rules on the same shop floor.

Read the full case study

Talk to the manufacturer

Get the right explosion proof vacuum for your application.

Tell us what you need to vacuum and where. Our technical team will recommend the PrestiVac model best suited to your material, your classification and how hard you will work it — and because we build every unit ourselves, we can modify it to fit.

Get a Quote
  • Legally certified explosion proof
  • Solid stainless steel construction
  • Industry-best 3-year warranty
  • Designed & manufactured in the USA
  • 200+ vacuum versions