Products
Industrial vacuum solutions for every environment
From combustible dust collection and explosion-proof cleaning to pharmaceutical, food processing, and heavy industrial applications — engineered for the material it collects and the environment it runs in.
Grounded, bonded recovery for combustible dust
Explosion Proof Vacuums
Built for facilities where the dust itself is the hazard. Conductive stainless construction, grounded and bonded from hose tip to casters, with power units selected for the area classification — so routine housekeeping never becomes an ignition source.
- Grounded & bonded conductive path throughout
- Anti-static hoses and accessories
- Immersion separation options for reactive metals
- Configurations for classified areas
99.99% filtration for fine and hazardous dust
HEPA Vacuums
Tested HEPA filtration keeps captured fines captured — for pharmaceutical powders, silica, allergens and any application where exhaust air quality is part of the requirement.
- HEPA filtration at 99.99%
- Multi-stage filtration ahead of the HEPA
- Stainless contact surfaces
- Containment-oriented collection options
Air-operated — no electrical components
Pneumatic Vacuums
Driven entirely by compressed air, with no motors, switches or wiring anywhere on the unit — the straightforward answer for classified areas and wash-down environments.
- Zero electrical components
- Suited to classified areas
- Minimal moving parts, minimal maintenance
- Runs from plant compressed air
Continuous-duty recovery for demanding plants
Industrial Vacuums
Heavy stainless systems built for daily production housekeeping — abrasive debris, high volumes and long duty cycles that consumer-grade equipment can't survive.
- Stainless steel construction
- Continuous-duty power units
- Large-capacity collection containers
- Serviceable, long-life components
Static dissipating throughout
ESD Static Free Vacuum Cleaners
Built with static dissipating components throughout — housings, filters, hoses and tools — so charge cannot accumulate where it matters. Specified where a discharge could ignite combustible dust, and where sensitive electronics must be protected from electrostatic damage.
- Static dissipating housings, filters, hoses and tools
- Continuous grounded and bonded recovery path
- Suited to both ignition prevention and component protection
- Solid stainless steel construction
Judged by what leaves the exhaust
Cleanroom Vacuum Cleaners
Vacuum cleaners for controlled environments, where the machine must remove contamination without contributing any. Absolute filtration, smooth wipeable stainless surfaces and contained collection so a cleaning pass does not raise the particle count of the room.
- HEPA and ULPA absolute filtration options
- Smooth, wipeable 316 and 304 stainless construction
- Contained, sealed collection
- Dedicated equipment for controlled areas
Containment and sanitation together
Pharmaceutical Vacuum Cleaners
Built for active ingredients, excipients and potent compounds, where exposure limits and sanitation requirements govern the specification. Absolute filtration retains the fine fraction, and stainless construction stands up to wash-down and changeover routines.
- HEPA absolute filtration for potent powders
- Sealed collection and controlled disposal
- 316 and 304 stainless, wash-down friendly
- Supports containment and sanitation records
Liquids, sludge and dust on one platform
Wet & Dry Systems
Recovery systems configured for coolants, wash-down water, chemical spills and slurry as readily as dry dust — with construction matched to what's being collected.
- Wet and dry recovery on one unit
- Corrosion-resistant configurations
- High-capacity liquid collection
- Explosion-proof wet recovery options
Facility-wide housekeeping from fixed drops
Central Vacuum Systems
A remote power unit and separator serving inlet drops across the plant through engineered piping. Operators clean at every station without moving equipment; material consolidates at one discharge point.
- Engineered piping and inlet layout
- Single consolidated discharge point
- Sized to simultaneous-operator demand
- Explosion-protection options where required
Designed around your exact application
Custom Engineered Systems
When the material, the process or the facility doesn't fit a standard configuration, we build the system that does — from specialty separators to complete recovery installations.
- Application-specific engineering
- Specialty separation and filtration
- Integration with existing processes
- Documentation for your compliance file
Grounded hoses, tools and filters
Accessories
Static-dissipative hoses, stainless wands, brushes, crevice tools and replacement filtration — the parts that keep a recovery system performing to its specification.
- Anti-static hose assemblies
- Stainless and non-sparking tools
- Replacement HEPA and cartridge filters
- Application-matched nozzles
The real lineup
Every model. Actual photography.
The photographs below are the actual PrestiVac units — stainless construction, model names as the factory designates them. Full datasheets and per-model specification pages are in preparation; request specifications for any model and our technical team responds directly.
Find the right series in two questions
What are you recovering?
AVX-5 EXAVXEX
AVX-5-10 EX HEPAAVXEXHEPA
AVX-5-10 EX MR HEPAAVXEXHEPAMR
AVX-15 EX HEPAAVXEXHEPA
AVX-15 EX MR HEPAAVXEXHEPAMR
AVX-15 EX RCTAVXEXRCT
AVX-15 EX RCT HEPAAVXEXHEPARCT
AVX-20 EX RCTAVXEXRCT
AVX-20 EX RCT HEPAAVXEXHEPARCT
AVX-25 EX RCT HEPAAVXEXHEPARCT
AVX-25 EX RCT IS HEPAAVXEXHEPARCTIS
AVX-55 EXAVXEX
EVX-5 EX RCT IS HEPAEVXEXHEPARCTIS
EVX-5 EX HEPAEVXEXHEPA
EVX-5-10 EX HEPAEVXEXHEPA
EVX-5-10 EX MR HEPAEVXEXHEPAMR
EVX-10 EX HEPAEVXEXHEPA
EVX-10 EX RCT HEPAEVXEXHEPARCT
EVX-15 EXEVXEX
EVX-15 EX HEPAEVXEXHEPA
EVX-15 EX MR HEPAEVXEXHEPAMR
EVX-20 EX RCT HEPAEVXEXHEPARCT
EVX-25 EX RCT HEPAEVXEXHEPARCT
EVX-55 EX HEPAEVXEXHEPA
EX1-5 RCT IS HEPAEX1HEPARCTIS
EX1-5 HEPAEX1HEPA
EX1-5-10 MR HEPAEX1HEPAMR
EX1-10 HEPAEX1HEPA
EX1-15 HEPAEX1HEPA
EX1-15 MR HEPAEX1HEPAMR
EX1-15 RCTEX1RCT
EX1-15 RCT HEPAEX1HEPARCT
EX1-20 RCT HEPAEX1HEPARCT
EX1-25 RCT HEPAEX1HEPARCT
EX1-55 HEPAEX1HEPA
AV1AV & EV
AV1 TTAV & EVTT
EV1AV & EV
EV1 TTAV & EVTT
1.25 in accessory kitAccessories & Kits
1.5 in accessory kitAccessories & Kits
1.5 in suction kitAccessories & Kits
AV air hoseAccessories & Kits
Tool setAccessories & Kits
VACOMEGAH kitAccessories & Kits
VACOSE110 kitAccessories & Kits
Factory line specifications
Extracted from 410 factory brochures and shown at the line level — brochure nomenclature differs from the photographed model names above, so figures describe the line family, and your exact configuration is confirmed per model by engineering. Certification lines are reproduced verbatim from the factory documents.
- RCT — Removable Collection Tank system
- ACF — Activated Carbon Filtration — adsorbs fuel & solvent vapors
- EX / DIV — Hazardous-location rating per NEC / NFPA 70
- HEPA — Tested to EN 1822 (H14 by MPPS method)
- TT · IS · MR — Configuration suffixes — specification on request
AVX Series — air-operated explosion-proof
24 factory brochures- Double Venturi generates Powerful Heavy Duty suction with over 180” H2O Vacuum and 200 CFM
- Air operated Pneumatic units do not have any electrical components or moving parts so they can run continuously and will not overheat or breakdown
- Static dissipating ESD safe
- All Stainless steel construction makes it a solid unit that is easy to clean and sterilize
- Stainless steel industrial cart assembly with ESD safe, conductive wheels
| Brochure model | H₂O | CFM | Air Watts |
|---|---|---|---|
| AV1-5 EX | 180″ | 100 | — |
| AV2-5 EX | 180″ | 200 | — |
| AV1-10 EX | 180″ | 100 | — |
| AV1-25 EX | 180″ | 100 | — |
| AV1-55 EX | 180″ | 100 | — |
| AV2-10 EX | 180″ | 200 | — |
EVX Series — electric explosion-proof
12 factory brochures- Single phase Explosion Proof motor with 321 Peak Air Watts, 68” H2O Vacuum and 142 CFM
- Static dissipating ESD safe
- All Stainless steel construction makes it a solid unit that is easy to clean and sterilize
- Stainless steel industrial cart assembly with ESD safe, conductive wheels
- Complete with static dissipating suction hose and accessories
| Brochure model | H₂O | CFM | Air Watts |
|---|---|---|---|
| EX-5 | 68″ | 142 | 321 |
| EX-10 | 68″ | 142 | 321 |
| EX-25 | 68″ | 142 | 321 |
| EX-55 | 68″ | 142 | 321 |
| EX-5 ACF | 68″ | 142 | 321 |
| EX-5 RCT | 68″ | 142 | 321 |
EX1 Series — HEPA industrial
14 factory brochures- Double Motor produces powerful suction with over 1000+ Peak Air Watts, 135” H2O Vacuum and 230 CFM
- Stainless steel construction makes it a solid unit that is easy to clean and sterilize
- Industrial Stainless steel cart assembly
- Static dissipating ESD safe
- Complete with suction hose and accessories
| Brochure model | H₂O | CFM | Air Watts |
|---|---|---|---|
| EV1-5 HEPA | 135″ | 123 | 560 |
| EV2-5 HEPA | 135″ | 230 | — |
| EV1-10 HEPA | 135″ | 123 | 560 |
| EV1-25 HEPA | 135″ | 123 | 560 |
| EV1-55 HEPA | 135″ | 123 | 560 |
| EV2-10 HEPA | 135″ | 230 | — |
AV1 Series — compact industrial (air)
14 factory brochures- Double Venturi generates Powerful Heavy Duty suction with over 180” H2O Vacuum and 200 CFM
- Stainless steel construction makes it a solid unit that is easy to clean and sterilize
- Industrial Stainless steel cart assembly
- Complete with suction hose, compressed air supply hose and accessories
- Quiet operation with only 60 dB
| Brochure model | H₂O | CFM | Air Watts |
|---|---|---|---|
| AV1-5 | 180″ | 100 | — |
| AV2-5 | 180″ | 200 | — |
| AV1-10 | 180″ | 100 | — |
| AV1-25 | 180″ | 100 | — |
| AV1-55 | 180″ | 100 | — |
| AV2-10 | 180″ | 200 | — |
EV1 Series — compact industrial (electric)
13 factory brochures- Powerful motor with 560 Peak Air Watts, 135” of Vacuum and 123 CFM
- Stainless steel construction makes it a solid unit that is easy to clean and sterilize
- Industrial Stainless steel cart assembly
- Static dissipating ESD safe
- Complete with suction hose and accessories
| Brochure model | H₂O | CFM | Air Watts |
|---|---|---|---|
| EV1-5 | — | 123 | 560 |
| EV1-10 | — | 123 | 560 |
| EV1-25 | — | 123 | 560 |
| EV1-55 | — | 123 | 560 |
| EV2-10 | 135″ | 230 | — |
| EV2-25 | 135″ | 230 | — |
Built for your floor
One discipline. Every environment.
Three ways in
Find it by industry, material, or application
By industry
Certified where it counts
Legally certified explosion-proof — documented everywhere else
The marks we hold are stated precisely, certificate numbers included. The standards we support are backed with documentation per application — never a badge wall.
NFPA 660
The consolidated combustible-dust standard — successor to 652, 654, 484, 61, 655 and 664.
Learn moreOSHA dust rules
Grain, silica, lead, coke, cotton — materials with their own federal standards, taught on their guide pages.
Learn moreUL 1203 Certified
Certificate — Class I, Gp. D; Class II, Gps. E, F & G; Temp. Code T3C. Explosion-proof lines certified for hazardous locations.
Learn moreYour DHA governs
Area classification and equipment selection flow from the Dust Hazard Analysis — we specify against it.
Learn more
Facility Layout Estimator
Portable fleet or central system?
Four inputs for a preliminary read on which architecture fits your facility.
Facility floor area
Cleaning points / stations
Operators cleaning at the same time
Consolidating waste at one discharge point
Preliminary orientation only — piping runs, vertical distance and material properties can change the answer. A facility assessment settles it.
Talk to the manufacturer
Get the right explosion proof vacuum for your application.
Tell us what you need to vacuum and where. Our technical team will recommend the PrestiVac model best suited to your material, your classification and how hard you will work it — and because we build every unit ourselves, we can modify it to fit.
- Legally certified explosion proof
- Solid stainless steel construction
- Industry-best 3-year warranty
- Designed & manufactured in the USA
- 200+ vacuum versions