Vacuum solutions engineered for ammunition & firearms
Two safety cultures share one campus here — precision machining's rules on one side, explosive-materials law on the other. This program serves the machining, casing and range sides; primer and propellant areas run under NFPA 495 and ATF frameworks with equipment and methods specified to those rules, a boundary this page draws in ink.
Boundary-First
Energetic areas: their rules govern
HEPA Filtration
Range lead and fines retained
Grounding Discipline
Absolute, everywhere on site
Built for Brass & Steel
Case forming to final machining
Explosion-Proof
Manufacturing specialists
1000+
Vacuums sold worldwide
USA
Designed & manufactured
Direct
Buy from the manufacturer
NFPA 660
ATEX / IECEx principles
Ammunition & Firearms production process explorer
Every stage. Every challenge. The right vacuum solution.
From brass coil to proof range, the work alternates between conventional machining and energetic-materials territory. Walk the stages — and watch where the boundary falls.
Stage 01 — Case forming & annealing
Draw presses and trimmers shed brass chips and lube residues continuously — floor and press-base recovery on the shift schedule keeps the conventional side conventional.
Key challenges
Two safety cultures, one campus
Energetic Boundaries
Primer and propellant areas run under explosive-materials rules — equipment and cleanup methods are specified there, and only there.
ATF & NFPA 495
Licensing and the Explosive Materials Code frame the energetic side of the house — the program defers to that frame by design.
The Range Lead Program
Priming compounds and bullet fragmentation dose range surfaces continuously — HEPA recovery on schedule is the management core.
Static Is Different Here
Grounding discipline is good practice everywhere and absolute law near energetics — one habit, campus-wide.
Brass Everywhere
Cases, chips, trim and swarf accumulate at every forming and machining station — low ignition risk, constant volume.
Unburned Propellant
Range and loading-area dust can carry live propellant grains — energetic-residue clearance comes before routine recovery, always.
Dust & materials knowledge center
Know the side of the line
Combustibility and severity are material- and particle-size-specific — testing and your Dust Hazard Analysis govern. Full directory: metal dusts.
Applications on the conventional side
- CNC machining
- CNC milling
- CNC turning
- CNC grinding
- Metal cutting
- Laser cutting
- Plasma cutting
- Waterjet cutting
- Deburring
- View all
Built for performance. Built for compliance.
View all products →
Industrial Vacuums
Continuous-duty recovery for demanding plants
Learn more
HEPA Vacuums
99.99% filtration for fine and hazardous dust
Learn more
Explosion Proof Vacuums
Grounded, bonded recovery for combustible dust
Learn more
Representative case study
Controlling Sulfur Dust in a Specialty Chemical
How a representative chemical compounder runs housekeeping around the most ignition-sensitive common industrial dust — grounding verified before anything else moves, air-operated recovery with zero electrical components, and a disposal path that respects what burning sulfur becomes.
Read the full case studyTalk to the manufacturer
Get the right explosion proof vacuum for your application.
Tell us what you need to vacuum and where. Our technical team will recommend the PrestiVac model best suited to your material, your classification and how hard you will work it — and because we build every unit ourselves, we can modify it to fit.
- Legally certified explosion proof
- Solid stainless steel construction
- Industry-best 3-year warranty
- Designed & manufactured in the USA
- 200+ vacuum versions