Nutraceutical powders are used to produce the types of consumer products that one would see in a typical health food store: protein powders, shakes, and various types of pressed vitamin tablets. While these products may look simplistic to the end user, they are in fact a complex mixture of active ingredients and excipients. There may be 10, 20 or more different products in a powder blend consisting of the active ingredient, flavorings, glidants and dissolvent.

Inhalation of nutraceutical dust may cause adverse reaction in susceptible persons.

Illnesses from inhalation of nutraceutical dust can range from mild irritation in the lungs to permanent lung damage or, in some situations, cause death.

Nutraceutical Dust is Combustible and is an Explosion Hazard:

When most people think of controlling dust in the workplace, they think of taking steps to avoid inhaling dusts to prevent health problems. However, the accumulation of combustible dusts in the workplace can lead to far greater consequences. As seen in recent years, neglect of housekeeping and improper handling of combustible dusts can lead to property damage, injuries and loss of life.

Nutraceutical dust can form explosive/flammable mixtures with air in the presence of a suitable source of ignition.  This product is combustible and nutraceutical dust can form potentially explosive clouds.  Sources of ignition must be avoided and special provision must be in place to protect handling equipment.

In general, combustible particulates having an effective diameter of 420 μm or smaller, as determined by passing through a U.S. No. 40 Standard Sieve, are generally considered to be combustible dusts. However, agglomerates of combustible materials that have lengths that are large compared to their diameter (and will not usually pass through a 420 μm sieve) can still pose a deflagration hazard. Therefore, any particle that has a surface area to volume ratio greater than that of a 420 μm diameter sphere should also be considered a combustible dust.

The vast majority of natural and synthetic organic materials, as well as some metals, can form combustible dust. The NFPA’s Industrial Fire Hazards Handbook states, “any industrial process that reduces a combustible material and some normally non-combustible materials to a finely divided state presents a potential for a serious fire or explosion.”

Suggested Industrial Vacuums for Recovery of Toxic & Combustible Dust

PrestiVac HEPAPlus* Vacuums are specifically designed to safely vacuum toxic dusts. Equipped with a Certified Absolute HEPAPlus*filter with an efficiency of 99.995% on 0.2 micron so there is no risk of exposure or contamination for the operator or the environment. These vacuums are tested for absolute filtration. Testing Method: IEST RP-CC034.3. H14. MIL-STD 282 / A.S.T.M. - D2986-91.  MPPS method EN 1822.

PrestiVac Explosion Proof/Dust Ignition Protected Vacuums are designed to safely vacuum explosive, flammable, combustible conductive* dusts. Our Explosion Proof/Dust Ignition Protected Vacuums are completely grounded and static dissipating because they are built entirely with non-sparking metals and do not have any painted components so there is no risk of fire or explosion from a spark or static build up. All the electrical components, including the motor and starter are totally enclosed so there is no source of ignition. Our explosion proof vacuum cleaners comply with NFPA 484 guidelines and are an effective tool for good housekeeping practise as per OSHA.

Which Industries are at Risk with Nutraceutical Dust?